COLOR ME PINK UNIT 1 PDF HOW TO
COLOR ME PINK UNIT 1 PDF ISO

The orange wire on a aftermarket car stereo is the illumination wire. Failure to do so could result in damage to your car stereo or decreased performance from your antenna. If you are installing a new aftermarket car stereo, be sure to connect the blue wire to the same power source as your other stereo wires. In most cases, the blue wire will be connected to a 12-volt power source. This wire provides power to the antenna, which is necessary for the antenna to function properly. Antenna Wireīlue wire on a aftermarket car stereo is typically the antenna power wire. If you’re not comfortable doing this yourself, you can always take your car to a mechanic or audio specialist who can do it for you.

The ground wire should be attached to a bare piece of metal on the car chassis (usually near the battery), and it’s important to make sure that it’s properly attached so that there aren’t any gaps where electricity could flow unexpectedly. This helps ensure that the current flowing through the stereo is consistent and doesn’t get interrupted, which can cause problems like static noise or even a blown speaker. The ground wire ( black color wire) is a metal wire that’s connected to the car’s chassis and provides a path for electrical current to flow from the car’s battery to the head unit. For this reason, it’s important to make sure that the red wire is always fused correctly.

If there is no fuse, the red wire will constantly provide power to the stereo, even when the ignition is off, and this can quickly drain your battery. The red wire must be connected to a fuse in order for it to work properly. This ensures that the stereo doesn’t drain your battery when you’re not using it. This wire produces 12 volts of DC power to the stereo, and is usually switched so that it only has power when the ignition is on. Most head unit will have a red wire that is used as the “power” or “ignition” wire. While there is no one standard for wire colors, there are some general trends that can help you determine which wires go together. In a aftermarket car stereo system, the wires that connect the various components together are color-coded to make it easier to identify which wire goes where. What Color Wires Go Together In A Car Stereo? Pink/Aqua: Right front speaker (+)White/Violet: Right front speaker (-).Green/Brown: Ignition switched power (+12V) Turns on when you turn the key to “on” or “acc”.Yellow/Violet: Battery constant (+12V) always on.Aqua: Right front speaker (+)Beige: Right front speaker (-).Orange: Ignition switched power (+12V)Turns on when you turn the key to “on” or “acc”.Yellow: Battery constant (+12V) always on.Here is a quick guide to the most common wire colors and their functions: Color In either case, there will be a standard set of colors used for each function.

COLOR ME PINK UNIT 1 PDF ISO

Most aftermarket car stereos will use one of two standards for wire colors: EIA/TIA (Electronics Industries Alliance/Telecommunications Industry Association) or ISO (International Organization for Standardization).

COLOR ME PINK UNIT 1 PDF HOW TO

With this information, you’ll be able to install your new car stereo wiring in no time! How to Identify Aftermarket Car Stereo Wire Colors This guide will show you the most common colors and what they mean.

If I told you that there was a way to make your car stereo sound better than ever before?īelieve it or not, by using the right wire colors when installing your system, you can improve the quality of your music while also protecting your vehicle’s wiring. To refresh the color on lengths and ends, choose and apply a nuance of milk_shake® direct color or milk_shake® smoothies and leave in another 5-10 minutes.If you’re looking to install a car stereo, it’s important to know the wire colors so that you can connect them correctly.

apply the mixture only on the natural re-growth and leave in 45-60 minutes.Then, in order to refresh the colour on lengths and ends, choose and apply a nuance of milk_shake® direct color or milk_shake® smoothies and leave in another 5-10 minutes. apply the mixture only on the natural re-growth and leave in 30-35 minutes.Prepare again the same mixture and apply it on the re-growth. apply the mixture 2 cm from the re-growth up to the ends, leave in 20 minutes.For the lengths application, it is recommended to use a higher oxidizing power than the one used on the roots, in order to obtain a higher color intensity and brightness.li> Prepare again the same mixture and apply it on the re-growth leave in another 30-45 minutes. apply the mixture on the roots, on the lengths and on the ends, leave in 30 minutes.Wear gloves and apply the colour on dry, unwashed hair (only if hair is extremely greasy or there is a high quantity of styling products, should you wash it before).Ĭolor with nuances with a darker level or with the same level: Apply milk_shake® color specifics powerful protector on the whole hair outline.

Color me pink unit 1 pdf